|
| |
WETICO offers unlimited capacities and a wide
range of Reverse osmosis plants that will
fit the client’s needs & expectations,
some of WETICO's plants have been used as
part of a unique composition where precise
and flawless parameters are mandated. Our
Domestic, Clinic, and Laboratory standard
product range has a capacity of (10 –
1000 m3/d). The higher demand plants are custom
designed for unlimited capacities. Such plants
are used the Industrial, Domestic, and Irrigation
fields with such capacities as 10,000m3/d
and above. |
|
| |
The basic components of any Reverse osmosis
plants consists of membranes, pressure vessels
that contain the membranes coupled with the
structure which cohere the configuration,
as well as high pressure pumps and pre/post
treatments of the plant.
|
| |
|
| |
WETICO considers the material selection of
Reverse Osmosis plants an important issue,
as appropriate selection will prolong the
plant's life expectancy, Stainless Steel (S.S.)
piping is used for feed/reject and high pressure
lines; where PVC piping is usually used for
low TDS and low pressures. Furthermore; properly
selected monitors / controls and displays
are chosen so that the plant's performance
will be sustained and monitored properly.
|
| |
|
| |
WETICO's plant module consists of spiral wound
membranes inserted in GRP vessels; racking
system is designed & built to meet the
module configuration, as the spiral wound
contour is most successful for domestic &
wastewater effluent. The plant's configuration
can be arranged either in parallel to provide
adequate hydraulic capacity or in series to
affect the desired degree of demineralization,
with respect to the site layout.
|
| |
|
| |
Quality Control is implemented by stringent
procedures throughout the procurement and
manufacturing processes. Our procurement department
insures that all materials and equipment used
meets or exceeds the standards set by the
customer. On the other hand, our manufacturing
personnel are responsible for supplying and
installing QC calibrated gauges which are
placed to reflect the actual conditions, as
well as product and reject flow indicators
that are used to monitor & adjust flows
in accordance to the design parameters
|
| |
|
| |
|
|
|
